Size: 130*50*12mm
Battery:2000 mAh
Running time: about 17 hours
Charging: 2 Hours (Type C)
Package: 1pc ink mixer, 5 pcs sticks, 1pc charging cable
1. INSPECT＆ENSURE SAFETY
Visually inspect the mixing rod for anybends, cracks, or significant wear. Immediately replace any damaged rod to prevent poor mixing performance and potential hazards during high-speed operation.
2. DISINFECT FOR ASEPTIC PROTOCOL
Using a sterile gauze pad, thoroughly saturate it with isopropyl alcohol (70%-75%). Wipe down the entire mixing rod and the mixer's docking interface completely. After wiping, allow the parts to air-dry for at least 60 seconds to ensure effective disinfection and complete alcohol evaporation
3. PREPARE FOR MIXING
Dispense the required ink into a prepared pigment cup. Then, select the appropriate mixing speed on the device according to the cup's size and volume to achieve an optimal and vortex-free blend.
